Filter
Top Products
4. Install the Faceplate and Handle
Remove and discard the plaster guard and/or dome, if installed.
Rotate the valve stem fully counterclockwise to the ″OFF″
position.
Install the faceplate onto the valve so the notch is to the bottom
and secure with screws. Do not overtighten the screws.
Install the graphics ring to the faceplate, and rotate it clockwise to
lock it in place.
Fit the sleeve onto the valve.
Secure the handle in place with the screw.
Press the plug button firmly into place.
Graphics Ring
Screw
Faceplate
Valve
Sleeve
Handle
Handle
Screw
Valve
Plug Button
114487-2-CC 6 Kohler Co.