Filter
Top Products
Technical Information
Fixture*: Basin area Top area Weight
Bathing
well
45″ (114.3 cm)
x25″(63.5 cm)
58″ (147.3 cm)
x29″(73.7 cm)
510 lbs
(231.3 kg)
Water depth Capacity
19-1/2″ (27.3 cm) 105 gal (397.5 L)
* Approximate measurements for comparison only.
Pump Heater V A*
1.5 hp 1.5 kW 240 11
* Approximate measurements for comparison only.
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage
Circut-Breaker (ELCB):
Pump/control 208-240 V, 20 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under the whirlpool must provide for a minimum
of 2000 lbs (907.2 kg) loading.
Cast iron whirlpools are extremely heavy, making some
drop-in installations difficult. Splitting the deck/surround is
recommended if installing into a deck.
A pump/control access panel is required.
For a drop-in installation, the cut-out dimension is 64-1/2″
(163.8 cm) x 34-1/2″ (87.6 cm).
For an undermount installation, the K-587 template is
required.
The hot water supply should be 70% of capacity or greater.
Installations will vary.
K-856-H2
18"
(45.7 cm)
15-7/8" (40.3 cm)
66" (167.6 cm)
36" (91.4 cm)
3/4"
(1.9 cm)
24"
(61 cm)
1-1/2" OD
Pump/Control Access
34" (86.4 cm) x 15" (38.1 cm)
4-3/16"
(10.6 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
1/2" (1.3 cm)
No change in measurements if connected with drain
illustrated. (K-7147-AF or K-7147M-AF)
Product Diagram
TEA-FOR-TWOTM
TEA-FOR-TWOTM 5.5’ BATH WHIRLPOOL
Page2of2
1019482-4-
E