Filter
Top Products
6. Complete the Installation
Check for Leaks
Ensure all connections are tight.
Twist the aerator counterclockwise to remove it from the spout.
Allow the faucet to turn on.
Check all connections for leaks. Make adjustments as needed.
Allow water to run through the spout to remove any debris.
Allow the faucet to turn off.
Remove any debris from the aerator, then reinstall the aerator.
Secure the Hoses and Sensor Cable
NOTE: Cable ties (not supplied) are recommended to secure hoses,
cables, and electrical connections underneath the countertop.
Secure the hoses and sensor cable with cable ties to avoid
interfering with other items underneath the countertop.
Secure electrical connections with cable ties to avoid inadvertent
contact with water underneath the countertop.
Install the Cover and Handle
CAUTION: Risk of product damage. Verify the solenoid cable
and sensor cable are not being pinched during reassembly.
Assemble the cover to the valve body assembly.
Spout
Aerator
Handle
Screw
Cover
Valve Body
Assembly
Kohler Co. 9 1056542-2-B