Kohler 1102602-A2-D Plumbing Product User Manual


  Open as PDF
of 12
 
1102602-A2-D 4 KohlerCo.
4 Bracket
  Drill 3/8” (10 mm) xing holes at the marked locations on the oor and insert
the anchor. Install the washer and insert the hexagon screw into the bracket
then tighten the screw. Position the toilet in the installed position. Install the
sleeves, tighten the screw and aach the caps.
Floor xing option
5 Screw
  Drill 5/16” (8 mm) mounting holes at the marked locations. Insert anchors into
the holes. Place the toilet and align with anchoring holes position. Tighten screws
and aach the bolt caps.
Anchor
Screw
Sleeve
Hole
Cap
Hexagon
Lag Screw
Bracket
Washer
Anchor
Fixing Holes
Screw Cap
Screw
Anchor
Sleeve
Drill
 previous next