Filter
Top Products
3-4 A-61074 April 1997
Selecting a mode for
configuration
Perform the following steps to select a mode for configuration.
NOTE: Not all items available for definition need to be defined. If you
wish to allow an item to default or have performed a Mode to
Mode copy after fully defining the Copy From Mode, there is
no need to define each item.
Mode to Mode Copy
End Session
Previous Menu
Mode Configuration
Define Mode 1
Define Mode 2
Define Mode 3
Define Mode 4
Define Mode 5
Define Mode 6
Define Mode 7
Define Mode 8
Define Mode 9
Define Mode 10
Define Mode 11
Define Mode 12
Define Mode 13
Define Mode 14
Define Mode 15
Define Mode 16
Define Mode 17
Define Mode 18
• Select
Define Mode x
, where x is the number of the mode you wish
to configure.
The Mode Configuration window will appear:
Single
6006
3111
Supprs
FthenR
None
Off
Off
NA NA
Index Format
IA Field Width
Level Rules
IA Display Format
Adjoining IA
Batching
Length Monitor
Skew Monitor
Footswitch
Patch Reader
COIN2 Port Select
OCR
Bar Code Reader
Printr Controller
Front Printer
Rear Printer
Mode Name
Overrides
Off
n/a
n/a
Off
Supprs
Off
Off
MODE0
No Sav
Save & End Session
Save & Prev Menu
Don't Save & End Session
Don't Save & Prev Menu
Mode Number: 01 Mode Name: MODE01 Item #: 0.0
Mode Configuration
Mode configuration items may be selected from this window. A
detailed description of each item is provided in this section.