Kenwood NX-411 Home Security System User Manual


 
5
e Side 1 key
Press to activate its programmable function {page 7}. The
default is Squelch Off Momentary.
f PTT (Push-To-Talk) switch
Press and hold this switch, then speak into the microphone
to call a station.
g Side 2 key
Press to activate its programmable function {page 7}. The
default is Backlight.
h
key
Press to activate its programmable function {page 7}. The
default is Zone Up.
i
key
Press to activate its programmable function {page 7}. The
default is Menu.
j
key
Press to activate its programmable function {page 7}.
k
key
Press to activate its programmable function {page 7}.
l
key
Press to activate its programmable function {page 7}.
m
key
Press to activate its programmable function {page 7}. The
default is Zone Down.
n Keypad
Press these keys to send DTMF tones. These keys can
also be programmed with secondary functions {page 7} if a
programmable function key is programmed as “Function”.
o Universal connector
Connect a speaker/ microphone or headset here {page 3}.
Otherwise, keep the supplied cap in place.