Filter
Top Products
SECTION 2 PLAN YOUR INSTALLATION
D. TYPICAL THREADED IN AND OUT PIPES TO SOFTENER
If you are planning a threaded plumbing installation, with a 3-valve bypass, use the
drawing in Fig. 4 as a guide. Use union fittings, as needed, to connect the plumbing.
DELUXE VALVE MODELS
OUT
Outside
(Raw Water In)
FITTINGS
REQUIRED NOT
IDENTIFIED
90° Elbow (2)
Union (2)
Pipe (as reg.)
IN NOTE:
It may be easier to slip the pressure fit ground
clamps onto the plumbing prior to making all
connections permanent. See page3-8.
Outlet
1" x 3/4" reducer*
_VALVE
*NOTE:
For 1 in. plumbing connection,
use a 1 in.threaded straight connec-
tor.
2 - 5 Deluxe Valve
Problems, Ouestions? Call 1-800-426-9345 Kenmore Water Line