Filter
Top Products
Air Conditioner Features
(continued)
TO TURN UNiT ON:
NOTE: The following instruction represent the Touch Pad, the
same instructions can be used for the Remote Control.
YOU WiLL SEE:
i DO THIS:
_---_PRESS ON/OFF
| PAD
0
TO CHANGE
TEMPERATURE SETTING:
DO THIS:
TO RAISE
LOWER
® _!ii_iiiiii
YOU WiLL SEE:
¢,,_t
q
®
Note: Tap or hold either up(A) or down(v) button until the
desired temperature is seen on the display. This
temperature will be automatically maintained anywhere
between 60F (16C) and 90F (32C). If you want the display
to read the actual room temperature. See "To Operate on
Fan Only" section on Page 6.
TO ADJUST FAN SPEEDS: YOU WiLL SEE:
DO THIS:
PRESS
SELECT:
A 2 Digit Display is used to indicate the Fan Speed setting,
from 10 through 99. When the "SLOWER" button is
pressed the motor speed will slow clown at various
intervals, to a minimum setting of 10. To speed the motor
up, press the" FASTER" button. The speed will increase at
various intervals to a maximum setting of 99.