Filter
Top Products
B5150
85300185450
A, AIR QUALITY SENSOR: Automatically
monitors the air quality level and adjusts
fan speed accordingly+
B. CHECK FILTER INDICATOR: The indi-
cator will signal when to replace the
True HEPA Filter,
C. RESET FILTER: Resets the CHECK
FILTER indicator light.
D. AUTO: Changes the fan speed to AUTO.
E. PLASMA INDICATOR: Displays the
PLASMA activity. (See page 2 for
PtasmaWave TM Technology)
R AIR QUALITY LEVEL INDICATOR:
Displays the current quality of the air.
G. FAN SPEED INDICATOR:
Displays current fan speed setting.
H, FAN SPEED: Once the machine is on
and inAUTO mode, switch to manual
operation by pressing FAN SPEED
button on the unit.
J. POWER BUTTON: Turns the unit on
and off.
K. LIGHT SENSOR: When in AUTO mode,
this keeps the control panel lights dim
and will not allow the fan to increase
above QUIET speed when the room
is dark.
AUTOMATIC OPERATION: When in
AUTO mode, the air cleaner will automati +
cally sense the amount of impurities in the
air and adjust the fan speed accordingly_
When the unit is first turned on itwill default
to AUTO mode°
MANUAL OPERATION (Adjusting the
fan speed): Once the unit is on, switch to
manual operation by pressing the UP &
DOWN arrow buttons on the remote control
or the FAN SPEED button_ Once in manual
operation, the fan speed will not aulomati-
calty adjust to the air quality or light level.
, QUIET, MEDIUM, HIGH: These levels are
recommended for standard, daytime use.
HIGH wilt activate aulomatically when
sensors detect high levels of impurities
in the air. QUIET, the lowest setting, is the
energy saving mode.
oTURBO: The TURBO level, the highest
fan speed, can be activated manua!ly for
maximum air circulation+ The TURBO
tevel will not automatically activate+
8