Kenmore 721.358205 Vacuum Cleaner User Manual


 
Review this chart to find do-it-yourself solutions for a minor performance problems. Additional service
needed, other than those described in this owner's manual, should be performed at Sears Parts &
Repair Center.
WARNING
Electrical shock and personal injury hazard.
Disconnect electrical supply before servicing or cleaning the unit. Failure to
do so could result in electrical shock or personal injury.
CLEANER wILL 1} Unplugged at wail 0uilet. 1. Plug in firmly, check circuit breaker/fuse.
NOT RUN 2. Switch in off position. 2. Push switch to floor or carpet mode.
3. Thermal protector activated 3. See "To correct problem", page 9.
POOR JOB OF
DIRT PICKUP
1. Full or clogged dust bin.
2. Broken agitator belt.
3. Clogged hose or nozzle.
4. Hose not inserted fully
5. Worn agitator.
6. Hole in hose
7. Dust bin assembly improperly
installed.
8. Belt not installed on motor shaft.
9. Motor protection system
activated.
10. Agitator overload protector
activated
1. Empty dust bin and clean the filters
2. Replace agitator belt.
3. Clean hose or nozzte area.
4. Insert hose
5. Replace agitator.
6. Replace hose.
7. Properly install dust bin assembly
8. Install belt on the motor shaft
9. Check for clogs
1O.See "To correct problem", page 9.
DUST ESCAPES 1. Dust bin assembly improperly 1. Properly install dust bin
THE DUST BIN installed.
LIGHT WILL NOT 1. Burned out light bulb. 1. Replace light bulb.
WORK
-16-