Filter
Top Products
_iii_i_i_i_iii_ii SECTION 1 ii_iiiii;i_iiiiii_!i_iiiit WATER SOFTENER START UP
C. PROGRAM THE TIMER
F
UP button DOWN button
display
\
\
[ !
Customer AssJstar_ce
1-800-426-9_5
RECHARGE TONIGHT
RECHARGE NOW
ON/OFF-HOLD button
(Recharge Tonight-Now)
SELECT button
When the transformer is plugged in, a model code,
and a test number (example: $3.0) show in the face
plate display for 4 seconds. Then, 12:00 AM and
PRESENT TIME begin to flash.
UitraSoft 100
COOE
5R22
• COOE
5R2H
IS3.0
i _'w..JW I
PRESENT TIME |
UltraSoft 150
[530
J_.rlr-_
u
Notes:
If SR - - shows in the display, press the UP (_ or
DOWN (_ button until SR22 or SR24 shows. Then,
press the SELECT button to set, and change to the
flashing PRESENT TIME display.
To check the model code, unplug the transformer at
the wail outlet and ptugin again, if other than SR22
or SR24 shows, see page 5-3 to reset.
SOUND "BEEPER": A "beeper" sounds while
pressing buttons for timer set-up. One beep signals
a change in the face plate display. Repeated beeps
mean the timer will not accept a change from the
button you have pressed, telling you to use another
button. For example, while setting the hardness
(step 2), the beeper sounds repeatedly when the dis-
play reaches I using the DOWN button, or the high-
est hardness setting using the UP button.
B SET PRESENT TIME OF DAY
If the words PRESENT TIME do not show in the dis-
play, press the SELECTbutton (FIG. 2) until they do,
or see the previous notes.
• Press the UP / DOWN buttons to set the present
time. Press UP to move the display ahead; press
DOWN to move the time backward.
If the present time is between
noon and midnight, be sure PM
shows.
If the present time is between
midnight and noon, be sure AM
shows.
%B"I
PRESENT TIME j
1
Each press of the UP /DOWN buttons changes
the time by one minute. Holding the buttons in
changes the time rapidly.
1-3
Problems, Questions? Call 1-800-426-9345 Kenmore Water Line