Kenmore 580.513 Dehumidifier User Manual


 
Whenthebucketisfull,orwhenthebucketisnotintheproperposition,theBucketFulllightturnson
andtheunitautomaticallyshutsoff.Also,whenbucketisoutofposition,theunitwillbeep3times.
Thebucketmust bereplacedin the properpositionfor thedehumidifierto work.The
bucketfull lightwill beon andthe dehumidifierwill not run if thebucketis not inthe proper
position.
Thewaterbucketcanbeemptiedinoneofthreeways:
Empty the bucket manually,
When the bucket is full,
remove and empty it into a
large sink or tub. When
finished, replace it properly.
NOTE: To replace the bucket
properly, make sure the
slots on the back of bucket
are positioned correctly.
Place the dehumidifier
directly over drain.
Open the threaded bucket drain
hose connection inthe bucket
bydrilling a 3/8" (lOmm) to 3/4"
(19ram) hole in the center of the
connection.
Once opened, the bucket drain
hose connection will continually
drain water from the bucket.
Attach a garden hose to the
threaded bucket drain hose
connection to carry water to
the drain.
When being attached to the
bucket drain hose connection,
be sure the hose doesn't kink
or bend. It should lie fiat from
the dehumidifier to the drain.
-8-