Filter
Top Products
Ifthebuttonisextremelythick,makea testbuttonhole.
Ifitisdifficulttofitthebuttonthroughthetestbuttonhole,
lengthenthebuttonholebypullingthebuttonholderbackto
createagap_ .
Gap
S
\
• How to adjust buttonhole stitch density
Use the stitch length control _to adjust stitch density.
Turn the dial in direction _for a looser density_.
Turn the dial in direction _for a tighter density _.
f
J
LENGTH \
\
\
\
J
If the sides of the buttonhole are not balanced, do the
following:
• If the buttonhole looks like _, use the screwdriver to
move the lever to the right (+) to make the right side
of the buttonhole less dense (see illustration).
• If the buttonhole looks like _, use the screwdriver to
move the lever to the left (-) to make the right side of the
buttonhole denser.
Buttonhole pitch balance adjusting lever
(_ \\
\,
J
J
8O