Filter
Top Products
SECTION 2. PREPARE THE MACHINE FOR SEWING
Set Up the Machine
• Plug in the Machine and Switch on the Power
f -.
Power
switch
\
Power supply plug
Plug
connector
Machine
plug
NOTE: Before inserting the plug into your
machine, be sure the power switch is
OFF.
1.
Check your outlet to be sure it is a 110 to 120
Volt AC outlet.
2. Insert the machine plug into the three-prong
plug connector, as shown. It wil only fit one
way.
3. Insert the power supply plug into the outlet.
jSewing ight
4.
f
Power switch _
Push the light and power switch to turn
on the power and sewing light.
SAFETY FEATURE:
Your machine wil not operate unless the
light/power switch is turned on. If you are
interrupted or stop sewing, turn off the
light/power switch to prevent injury to
children.
= Foot Control Use
i
/
Foot con[ro
The foot control regulates the speed at
which you sew.
To increase speed, gently press down with
the ball of your foot.
To decrease speed, release your foot pres-
sure slightly.
NOTE: The foot control is sensitive and
will ncrease or decrease your
sewing speed immediately.
Practice on a scrap of fabric to
regulate your sewing speed to
your taste and needs.