Filter
Top Products
Set the Machine
Stitch selector
Top thread tension
control 3 to 6
Ztpper foo_
Stitch length
12
rend of opening
Top side
of fabric
1/8")
Top edge of fabric
,/
Fabric Preparation: To Sew:
Put the top sides of the fabric to- 1.
gether and sew to the end of the zip-
per opening. Use the reverse to lock 2.
the stitches.
Sew the zipper opening with stitch 3.
length at "6" and top thread tension
at "3"'.
Zipper teeth
Zipper tape
Fold back the left seam allowance
as shown.
Turn under the right seam allow-
ance to form a 1/8"' fold.
Place the zipper teeth next to the
1/8" fold and pin in place.
4, To sew the left side of the zipper,
set the zipper foot on the left side
of the needle.
5. Lower the zipper foot on the top
side at the bottom of the zipper
so that the needle pierces the fold
and the zipper tape,
6. Sew through the fold and the zip-
per tape to the point where the
slider begins.
7. Lower the needle to hold the fab-
ric and raise the presser foot.
34