Kenmore 153.327466 40 GAL Water Heater User Manual


 
Materials an Basic
Materials Needed
To simplifit the installation Sears has available the inst£Iation
parts shown below You may or may not need allof these materi-
als, depending on your type of installation
Tools
eeded
WATER HEATER INSTALLA.
TION KIT WITH FLEXIBLE
CONNECTORS FOR 3f4" OR
1/2" THREADED OR COPPER
PLUHBING
r .......
WATER HEATER HEAT TRAPS
HELP REDUCE HEAT LOSS DUE
TO THERHAL SYPHONING
EXPANSION TANKS FOR THERHAL
EXPANSION CONDITIONS AVAILABLE
IN 2 GALLON AND 5 GALLON CAPACITY
THROUGH LOCAL SEARS SERVICE
CENTERS
DRAIN PANS AVAILABLE IN 20"
DIAHETER FOR WATER HEATERS
HAVING A DIAMETER 18" OR LESS,
24" DIAHETER FOR WATER HEATERS
HAVING A DIAMETER 22" OR LESS
AND AVAILABLE IN 28" DIAHETER
FOR WATER HEATERS HAVING A
DIAHETER 7.6"OR LESS
szSiCTools
You may or may not need all of these tools, depending on your
type of installation, These tools can be purchased at your !ocal
SL_I[_ store°
Pipe Wrench (2)
Screwdriver
6 Foot Tape or Folding Rulo
Garden Hose
Drill
Pipe Dope or Teflon Tape
6 FOOT TAPE
GARDEN HOSE
SLOT-HEAD SCREW DRIVER
PHILLIPS SCREWDRIVER
PIPE DOPE
(SQUEEZE TUBE)
ROLL OF TEFLON TAPE
PIPE
WRENCH
DRILL
(Use only on water connections)
ADDITIONAL TOOLS NEEDED
WHEN SWEAT SOLDERING
Tubing Cutters or Hacksaw
Propane Torch
Soft Solder
Solder Flux
Emery Cloth
".-=Cite B._ushes
HACKSAW
314" WIRE BRUSH
1f2" WIRE BRUSH
ROLL OF LEAD FREE
SOFT SOLDER
ROLL OF EMERY
CLOTH
PROPANE TORCH
SOLDER TUBING
FLUX CUTTER