Filter
Top Products
Materials and Basic Tools Needed
Materials Needed
To simpli_T thc i*tstallation Scars has availablc thc i*tstallatio*t
parts shovcx_bclow. You may,or may,r_otnccd all ofthcsc matcrb
als dcpcndJng on ,,Tourtypc oi:'installatior_.
WATER HEATER INSTALLA-
TION KIT WITH FLEXIBLE
CONNECTORS FOR 3t4' OR
1t2_ THREADED OR COPPER
PLUMBING
EXPANSION TANKS FOR THERMAL
EXPANSION CONDITIONS AVAILABLE
IN 2 GALLON AND 5 GALLON CAPACITY
THROUGH LOCAL SEARS STORE OR
SERVICE CENTER
DRAIN PANS AVAILABLE IN 20"
DIAHETER FOR WATER HEATERS
HAVING A DIAHETER 18" OR LESS,
24" DIAMETER FOR WATER
HEATERS HAVING A DIAHETER 22"
OR LESS AND AVAILABLE IN 28"
DIAHETER FOR WATER HEATERS
HAVING A DIAHETER 25" OR LESS
Basic Tools
You may or may rtot nccd all of these tools, dcpcndJ*tg on your
typc of ir_svallation. Thcsc tools can bc pttrdlascd at your local
Scars s_aor¢,
Pipe Wrench (2)
Screwdriver
6 Foot;Tape or Folding Rule
Garden Hose
Drill
Pipe Dope or Teflon Tape
6 FOOT TAPE
GARDEN HOSE
SLOT-HEAD SCRE',H DRIVER
PHILLIPS SCREWDRIVER
PIPE DOPE
(SQUEEZE TUBE)
ROLL OF TEFLON TAPE
PIPE
WRENCH
DRILL
(Use only on water connections)
ADDITIONAL TOOLS NEEDED
WHEN SWEAT SOLDERING
Tubing Cubers or Hacksaw
Propane Torch
Soft; Solder
Solder Flux
Emery Cloth
Wire Brushes
3t4" WIRE BRUSH
1t2"WIRE BRUSH
_;_ PROPANE TORCH
ROLL OF LEAD FREE
SOFT SOLDER
ROLL OF EMERY SOLDER TUBING
CLOTH FLUX CUTTER