Filter
Top Products
Installation Instructions (cont'd)
Converting the Lower
Element (cont'd)
9. Tighten terminals 2 and 3 to ensure proper electrical
couNec_on.
I AWARNING
Failureto tighten terminal screwscan causea fire whichI
can result in DEATH, SERIOUS BODILY INJURY, OR I
PROPERTY DAMAGE.
10. Replace terminal cover on the thermostat, making sure the
notch is in place over the tab.
12. The adjustmentdial has a "D" shaped opening that matches
a "D" shaped shah on the thermostat. Align the opening in
the dial to the shaft and gently push the dial onto the sh_ft.
13. Replacethe accesspanel.
t AWARNING I
Make sure the therm_against the tank, the I
terminal cover is in ' "'"-place,and the insulationis replaced.
Failureto do so can result in DEATH, SERIOUS BODILY
INJURY,OR PROPERTY DAMAGE.
11. Fold the insulation back in place so that it completely covers
the thermostat and element.
/
x--
:'I_; _v
14, Complete wiring to the water heater, or if completed, turn
"ON" electric power to the water heater after filling the
tank with water.
I A CAUTION 1
Never usethis water heater unlessit is completelyfull of|
water. To prevent damage to the tank and heating ele-|
ment, the tank must be filled with water. Water musti
flow from the hot water faucet before turning "ON"|
power. |
12