Filter
Top Products
Installation Instructions (cont'd)
Converting the Element
(cont'd)
_,WARNING J
Make sure the thermostat is flush againstthe tank, the
terminal cover is in place, and the insulationisreplaced. I
Failureto do socan result inDEATH, SERIOUS BODILY
NJURY,OR PROPERTY DAMAGE.
10. Replace the insulation pad and tape on so that it completely
covers the thermostat and element.
12. Complete wiring to water heater, or if completed, turn
"ON" electric power to water heater after filling tank with
water.
1
A CAUTION
Never use this water heater unless it is completely full of
water. To prevent damage to the tank and heating ele-
ment, the tank must be filled with water. Water must
flow from the hot water faucet before turning "ON"
power.
Wiring Diagram
STANDARD WIRING FOR
2 WIRE LEAD WATER HEATERS
240 VOLT SINGLE ELEMENT
TO ELECTRIC POWER SUPPLY
11. Replace the access panel.
RED
LOWER HI-TEHP
LiMiT SWITCH
_OR3_OWA_S
LOWER HEATING ELEMENT
12