Kenmore 1250 Sewing Machine User Manual


 
ACCESSORIES
i; i _¸ _ :_:ii¸_iiiiii;_ili;il¸ ii
J
" _-,- . :
I I II I
NEEDLES
Us'e KENMORE needles. The size of the
needle should conform with the size of
the thread and both should be suitable
to the fabric (See next page).
Never use a bent needle or one with a
blunt po!nt.
Fig. 1. shows you the exact length of
your needle. Be sure you never use one
in your machine that is not this exact
length,
You will find among your accessories a
"Q NEEDLE",. with blue shank. This
special needle is to be used when
sewing knits and certain difficult
synthetic fabrics. If you experience
skipped stitches in any of your sewing,
use "O NF:EI)LF:",..
!
|
1
Flat _ .s
side
away
from
you.
PLACEMENT OF NEEDLE
Raise needle bar to its highest position
by turning the hand wheel toward you.
Loosen the needle clamp screw. Hold-
ing the needle with the flat side away
from you, slip the needle into the needle
bar. When it is in as far as it will go,
tighten the needle clamp screw with
screwdriver provided in the accessory
kit.