Filter
Top Products
BUTTON SEWING
SETTINGS
StretchStitchControl...... Horizontal
StitchWidthControl..........Mustbe
adjusted
StitchLengthControl....... :_i_
ZigzagPresserFoot
1,
,,
3.
4 k
5.
Align two holes of button with slot
of presser foot and lower foot to
hold the button securely,
Turn hand wheel manually until
needle point isjust above button,
Adjust stitch width control so
needle will enter left hole of the
button,
Turn hand wheel again by hand so
needle enters second hole,, Readjust
stitch width if necessary° Stitch a
number of times.
Finish sewing with an extra two
inches of thread remaining, Draw
these threads to reverse Side of gar-
ment and tie,
BAR TACKgNG
SETTINGS
Stretch Stitch Control ......... Horizontal
Stitch Width Control ..............1 to 5
Stitch Length Control ..........Green Zone
Zigzag Presser Foot
This stitch is similar to a very short
satin stitch and is used to reinforce
points of strain such as corners of
pockets and straps on lingerie.
Sew 4 to 6 zigzag stitches,