Filter
Top Products
SEWINGON BUTTONS
1. Turn feed dog control to left. Place needle into left hole of button,
align holes with slot of presser foot and lower presser foot.
2. Set stitch width control at width between holes of button. Test
width by turning handwheet slowly. Take several zigzag stitches to
sew on button, ending with needle on left side.
3. Set stitch width control at 0.
button to lock threads.
Pull threads to wrong side.
Take a few stitches in left hole of
NOTE: To make a small thread shank when sewing on a flat button.
place a stra:ght pin or needle between the holes of the button.
OVERCASTING
Set stitch width to 5. Set stitch length at 5. Zigzag stitch around raw
edge of fabric to completely cover the edge.
21