Filter
Top Products
Review this chart to find do-it-yourself solutions for minor performance problems. Any service
needed, other than those described in this owner's manual, should be performed by a Sears
authorized service representative.
IbWARNING
Electrical Shock Or Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the vacuum cleaner. Failure
to do so could result in electrical shock or personal injury.
Vacuum cleaner
won't run.
Poorjob of dirt pick-up.
1. Unplugged at wall outlet.
2, Tripped circuit breakedblown fuse
at household service panel.
3. On/off swilch not turned on.
4. Thermal protector tripped.
1. Full or clogged dust bin.
2. Wrong pile height setting.
3. Wornagitator.
4. Clogged nozzle ordust binport.
5. Clogged hose.
6. Hole in hose.
7. Broken/misplacedbelt.
8. Hose not inserted fully.
g. Motor protection system activated.
10. Dirty filters.
1. Pluginfirmly,pushon/offswitchto on.
2. Reset circuit breaker or replace fuse.
3, Push on/off switch to on.
4. Reset thermal protector.
1. Clean dust bin.
2. Adjust setting.
3. Replace agitator.
4. Check CLOG REMOVAL.
5. Check for clogs.
6. Replace hose.
7. Replacelfixbelt.
8. Insert hose fully.
9. Check for clogs.
10. Clean/change filters.
Vacuum cleaner picks up 1. Wrong pileheight setting. 1. Adjust setting.
moveable rugs or
pushes too hard.
Light won't work. 1. Burnedoutlightbulb. 1. Change lightbulb.
Agitator does not turn, 1. Brokenbelt. I. Replace belt.
2. Beltinstalledincorrectly. 2. Check BELTCHANGING AND
AGITATOR CLEANING.
Air flow restricted 1. Attachment userestrictsair flow. 1. Check ATTACHMENTS,
with attachment use, 2, Newcarpet fuzz clogged air path. 2. Check CLOG REMOVAL and clean
Sound changes, hose.
24