Filter
Top Products
Review this table to find do-it-yourself solutions for minor performance problems. Any service
needed, other than maintenance described in this Owner's Manual, should be performed by a
Sears or other qualified service agent.
_:.:..._.- . _ .7:. _. _._.:
Vacuum cleaner
won't tun.
Pc_rjobofdirt
pick*up.
1. Unplugged at wall outlet.
2,
3.
4.
Tripped circuitbreaker/blown fuse 2.
at householdservice panel.
Thermal protectortripped. 3.
Defective wall outlet.
I, Fullor cloggeddust bin.
2. Wrong pile height setting.
3. Worn agitator.
4. Clogged nozzle.
5, Cloggedhose.
6, Hole in hose.
7.
8.
1. Plug in firmly,selectthe desired set-
tingonthe touchcontrol,
Reset dmuit breaker or replace fuse.
4.
Hose not inserted fully. 7.
Motor protectionsystemactivated. &
Allowvacuumcleaner to cool, then
reset thermal protector.
Check w_tha goodappliance/lamp,
have properly s_rviced.
1. Empty dustbin.
2. Adjustsetting.
3. Take to yournearest Sears
Service Center.
4. Check CLOG REMOVAL.
5. Check for clogs.
6, Take to yournearestSears
Service Center.
Insert hose fully.
Check for clogs.
(change of sound)
g. Dirty filters, g. Change filters.
Vacuum Cleaner picksup 1. Wrong pile height setting. 1. Adjustsetting.
moveab_ rugsor
pushestoohard,
Lightwon'twork. 1. Burned outlightbulb. 1. Change light bulb.
Agltafordoes notturn. 1. Handle in full upright position. 1. Move handle from upright position.
2. AgitatorOverloadtripped. 2. Reset AgitatorOverload.
3. Thermal protector tripped. 3. Allow vacuum to cool, then reset
thermal protector.
Ainlow restricted 1. Attachmentuse restrictsair flow. 1. CheckATTACHMENTSfor fuzz, lint.
withattachmentuse. pet hair or otherdebds.
Soundchanges. 2. New carpet fuzz clogged airpalh. 2. Check CLOG REMOVALand clean
hose,
D_ffleultyadjustingpile 1. Vacuum cleanernot in properupright 1.
heightset6ng position.
Placevacuum cleanerin thelocked
uprightposition,tiltthe vacuumback
slightlyand adjustpileheight,
2O