Kenmore 116.33613 Vacuum Cleaner User Manual


 
The attached
hose swivels to
make cleaning
easier in every
direction.
Remove the
hose from the
hose clip by
pulling straight
out.
TELESCOPING WAND WITH
SUCTION CONTROL SLIDE
SOME MODELS
Crevice Remove the
Toot telescoping
wand from
,Telescoping its storage
Wand position.
Remove the crevice tool from its storage
position in the wand. Turn the locking ring to
the UNLOCK position.
Extend the wand to its full length. Turn the
locking ring to the LOCK position. Attach the
extension wand onto the open end of the
hose.
Suction
Wand _ _. Control Slide
Upper
Wand
Align the tabs on the extension wand with
the "J" slots in the hose. Push the wand into
the hose and twist to the right to lock.
To achieve maximum reach with
the attachments, add the
crevice
tool to the end of
the wand by Suction
inserting and Control
Slide--_
twisting slightly.
Wand
Crevice
Tool
When using the
dusting brush
or the combina-
tion brush, they
may be
attached direct-
ly to the wand
or placed on
the end of the
crevice tool.
TO OPERATE SUCTION
CONTROL SLIDE
Telescoping Wand
When using
attachments Suction
for cleaning Control
Slide
draperies,
small rugs
with low pile
and other
delicate
items, twist
the suction control slide to the open position.
This lever is located on the telescoping
wand, close to the hose.
This will reduce suction for ease of cleaning.
NOTE: Return suction control slide to the
closed position for normal cleaning.
CAUTION
When usingattachments,becarefulnot_o
overextendbhes_ch hosewhenreaching.
T_ng to reach _ thehosestretch
capabililycouldcauselhe clearerto _p ova-.
Make surethe ca,'l:mM:m_floorselectoris in
the barefloorposition.Damagetolhefloor
surfacemayoccurif thecaipet_ is
used.