Kenmore 116.33612 Vacuum Cleaner User Manual


 
Check motor safety filter frequently and
change when dirty.
' lect WARNING
rical Shock Hazard
Unplug power cord from electrical
outlet. Do not operate the cleaner
without the motor safety filter. Be
sure the filter is dry and properly
installed to prevent motor failure
and/or electdcal shock.
Remove the dust bag as outlined in the
DUST BAG CHANGING section.
MOTOR SAFETY FILTER
ELECTROSTATIC
1. This white & grey
filter must be
replaced when dirty.
It should be Motor
Safety
replaced regularly Filler
depending on use
conditions. The fil-
ter CANNOT be
washed as it will
lose its dust trap-
ping ability.
NOTE: See PARTS AND FEATURES for
motor safety filter number.
Motor
Safety
Filter
2. If the filter,
located in the bot-
tom of the bag
cavity, is dirty,
remove it by
pulling forward out
from under the
ribs.
3. Replace the
filter, white side
up, by sliding it
back into place
under the ribs in
the bag cavity.
Motor
Replace the bag as outlined in the DUST
BAG CHANGING section.
WARNING
Do not operate without exhaust
filter.
EXHAUST FILTER
HEPA
The exhaust filter cartridge must be
replaced when dirty. It should be
replaced regularly depending on use
conditions. The filter CANNOT be
washed as itwill lose its dust trapping
ability.
NOTE: See PARTS AND FEATURES for
the exhaust filter number.
Slide the
exhaust filter
cover release
down. Pull out
on exhaust fil-
ter cover to
remove from
bag cover.
Exhaust Filter II I
Cover Release_
Exhaust _i _
Filter _1!
cover/_
Bag
Exhaust
Remove the
exhaust filter car-
tridge from the
bag cover.
Replace the exhaust filter
cartridge, carefully posi-
tioning it so that it fits into
the bag cover. The grey
edge of the filter should
be facing away from the
operator. Push only on
filter cartridge frame, not
on filter itself.
Exhaust Filter
Cover Release--__,
Exhaust I_
Filter ICoverF
Bag
Exhaust
Replace the
exhaust filter
cover and
secure the
latch by push-
ing it upward.
15