Kenmore 116.25512 Vacuum Cleaner User Manual


 
POWER-MATE® CARE
Always follow all safety precautions when cleaning and servicing the Power-Mate".
! 'v, lWARNING Electrical Shock Or Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the unit. Failure to do so
could result in electrical shock or personal injury from cleaner suddenly starting,
TO REMOVE BELT
1. Turn Power-
Mate ® upside
down.
2. Unscrew the
two (2) Power-
Mate ® cover
screws.
3. Turn Power-
Mate e right side
up, Press handle
release pedal
and lower the
swivel. Lift rear
latches up.
Side
Latch Latches
4. To remove cover,
grasp the sides and pull
out.
5. Lift agitator
assembly out
and remove
worn belt.
6. Check and
clean end cap
areas. See
AGITATOR
ASSEMBLY
for pictureof
complete
agitatorassembly.
End Cap
TO CLEAN AGITATOR
NOTE: In order to keep cleaning efficiency
high and to preventdamage to yourvacu-
um, the agitatormust be cleaned every_time
the belt is changed.
The agitatormust also be cleaned accord-
ing to the following schedule:
Vac_uum ClQaner UsQ
HEAVY -
(used daily)
MODERATE -
(used 2-3 times/week)
LIGHT -
(used I time/week)
Clean Agitator
every week
every month
every2months
IMPORTANT
Disconnect cleaner from electrical outlet.
Check and remove hair, string and lint build-
up frequently in the Power-Mate ® agitator
and end cap areas.
Remove any dirt or debris in the belt path
area or in the brush roller area.
Carefully remove any string or debris
located on the agitator, or end caps.
Agitator Assembly
Belt Pulley_
Brush Unit
16