Filter
Top Products
CANISTER
1, Open the canister hood.
2. Check to see that the dust bag is proper-
ly installed. See BAG CHANGING for
instructions.
3. Check to see that the motor safety filter
is properly installed. See MOTOR SAFETY
FILTER CLEANING for instructions.
HOOD AND COVER
it is normal for the canister hood and cover
to come off when opened further than
needed. Line up the hinge slots, insert the
hinges into the slots, and close the hood
and cover to reinstall.
CAUTION
Never open canister hood with the
cover open. This will help to
prevent damage from occurring to
the canister hood and/or cover.
HOSE
1. Line up the hose
latch tab and notch
in canister hood
and insert hose into
canister until it
snaps in place.
To remove: Lift
hose latch tab
upward and pull up
on hose.
Handle
Hose
Latch
Tab
Notch
2. insert H
handle into
wand until
lock button
snaps in
place. Be
sure hose is
not twisted.
Hi
To remove:
Handle
Quick Press handle
Release quick release
(Some button and
pull up on
handle.
To store: Disconnect hose from wands and
canister to prevent stress on hose during
storage. Store hose in a loosely coiled
position so the hose covering is not
stressed.
TO ATrACH CADDY
1. Align the tab
on the wand with
the slot in the
Power-Mate Jr.®
caddy.
2. Press the
caddy onto the
upper wand.
The caddy will
snap into place
Tab
TO INSERT POWER-MATE JR °
1. Place the front
of the Power-
Mate Jr.®into the
caddy.
2. Rotate the
Power-Mate Jr.®
back until it
snaps into place.
TO REMOVE POWER-MATE JR. ®
1. Press the latch and lift the Power-Mate
Jr.®out of the caddy.
7