Filter
Top Products
13
English
Checking/replacing the flat pleated
filter
(Order no. 6.414-498)
Regularly check the flat pleated filter for damage.
If the flat pleated filter is damaged, replace it
immediately, otherwise the motor may be damaged.
! Switch the unit off and open the cover on the
filter compartment.
! Remove the flat pleated filter and replace with
a new one. Close the cover.
Checking and cleaning the
accessories
! Check the nozzle, suction hose and suction
tube for blockages. They can be cleaned by
rinsing with water. Leave them to dry before
using.
Storing the vacuum cleaner
! Switch the machine off.
! Pull out the mains cable.
Note: Pull out the mains cable by the plug. Never tug
the cable.
If you have been working in wet-vacuuming
mode:
! Empty the dirt container, rinse the inside
if required and leave to dry.
If you have vacuumed up viscous liquids:
! Rinse the accessory.
! Place the suction tubes and accessories in the
accessory bracket.
Technical Specifications
Mains connection 220–240 V
(AUS) 240 V
1~50,60 Hz
Fuse protection (surge-proof) 10 A
Power (suction motor)
P
max
1200 Watt
P
nom
1000 Watt
Air flow rate 68 l/s
Vacuum 200 mbar
Capacity 18 l
Max. water capacity 12 l
Length 390 mm
Width 290 mm
Height 490 mm
Weight without accessories 6 kg
Nominal width, accessory Ø 35 mm
Sound level 72 dB(A)
Class of protection II
Cable length 5 m
2.
2.
1.1.