Karcher 400 E Electric Heater User Manual


 
English Puzzi 400 E 10
FOR OUR ENVIRONMENT
Packaging waste disposal
When unpacking, do not throw away
packaging in the garbage, instead,
take it to collecting stations.
Intended use
Wet cleaning unit for carpets and
home textiles
Corresponding to the descriptions
and safety instructions given in
these operating instructions.
Any other use is considered
inappropriate. The manufacturer is
not liable for damages resulting
from this, the risk is the user’s
only.
Apply the cleaning agent
,Never fill with solvent (petrol,
acetone, thinner etc.)!
Avoid contact with eyes and skin
Observe safety and handling
instructions of the cleaning agent
manufacturer
KÄRCHER offers a tested,
individual cleaning agent
program.
Your dealer will be pleased to advise
you.
OPERATING INSTRUCTIONS
Thoroughly mix fresh water and
cleaning agent in a clean
container
Pour in pulverised cleaning agent
in water and stir
Observe safety and handling
instructions of the cleaning agent
manufacturer
Fill unit with a maximum of 40 l
cleaning agent solution
Connecting to the mains
Only work with dry hands
Supply voltage must coincide with
voltage on rating plate
Always completely unwind
extension cable
Only connect splash-proof
extension cables
Extension cable must not be in
water
For the connected load, see
"Technical Data"
Set switches (1, 2 and 3) to "0"
Insert power plug
Switch on switch 1 (suction)
Switch on switch 2 (spray)
Turn switch 3 (heater) on
Adjust the temperature regulator 4
An additional plug-socket is
available for the connection of
electric auxiliary units