Filter
Top Products
5
finger inside the thumb groove and pull
the compartment lid upwards.
Turn off the vacuum cleaner when
changing any attachments.
Motor Driven Powerhead
The Jaguar Soarer Vacuum Cleaner
features a floor tool which is powered by
a dedicated motor giving additional power
and brush bar speed for picking up dust,
hair and dirt.
Always switch the vacuum off then switch
off at the power outlet and inplug the
vacuum prior to connecting the
powerhead.
To connect the Powerhead, simply remove
the multi-terrain floor tool by pulling it off
the wand. Connect the Powerhead floor
tool to the narrow end of the wand and
push together firmly. Insert the Powerhead
cord into the marked ‘Powerhead’ inlet
connection point on top of the vacuum
cleaner, near the carry handle.
Fix the powerhead cord to the hose and
the wand with the clips supplied.
WARNING: Do not operate the
powerhead with the wand in the
vertical (parking) position as this will
cause damage to the unit.
IMPORTANT: ENSURE THE
VACUUM CLEANER IS TURNED
OFF AND UNPLUGGED FROM
THE POWER OUTLET PRIOR TO
CLEANING OR MAINTAINING
THE POWERHEAD.
Dust bag indicator and
changing the dust bag
The dust bag should be changed when full.
The dust bag indicator window will
gradually turn red as the bag fills up and
when the dust bag indicator displays ‘red’
it is time to change the dust bag.
Always switch the vacuum off, then switch
off at the power outlet and unplug prior
to replacing dust bags or filters.
To remove the dust bag, ensure the unit is
down on its wheels, remove the crush
proof hose and push the ‘Dust bag
compartment lid release lever’ underneath
the handle. Once the lid has released, pull
the top cover back.
To remove the bag, grasp the top of dust bag
and pull out, and dispose in a rubbish bin.
To place a new dust bag, take a fresh dust
bag and with the arrow (printed on the
material section of the dust bag) pointing
down slide the material down into the
dust bag holder, until it comes in contact
with the bottom of the holder.
HINT: once the bag is inserted ‘puff-out’ the bag as
much as possible to ensure the full capacity of the
bag can be taken up.
When vacuuming fine dust par
ticles,
the
fine dust par
ticles can clog the por
es of
Dust bag holder
Filter holder
HEPA filter