Filter
Top Products
HOW TO OPERATE
1. Remove your heater from the
packaging, unwind the cord to its full
length.
2. Read all the instructions fully before
plugging the unit in.
3. Place the heater on a level surface in a
stable position. Make certain the heater
element control switch is in the OFF
position.
4. Remove any element support Guards
(ie Foam or paper packing).
5. Plug the power cord in a 240Volt outlet,
and switch the power outlet on.
6.The heater control panel is located at
the right hand side of the unit,
underneath the plastic flap (for safety).
7.To operate the control dial, lift the
plastic flap. Use the control dial to
switch the heater to the desired setting.
TEMPERATURE SETTING
1. Model Numbers KRH150 &
KRH200
KRH150 & KRH200 have 2 temperature
settings.
Setting 1 – Turn the control dial to the
low setting to heat the lower element
only.
Setting 2 – Turn the control dial to the
high setting to heat both elements.
2. Model Number KRH240
KRH240 has 3 temperature settings
Setting 1 – Turn the control dial to the
low setting to heat the lower element
onl
y
.
Setting 2 – Turn the control dial to the
medium setting to heat the bottom and
mid
dle elements.
Setting 3 – Turn the control dial to the
high setting.This will operate all elements.
Note:There is a tip over switch on the base.When
the heater tips over, it will turn off automatically.
CARE AND MAINTENANCE
• Always turn off and switch off at
power outlet then unplug the heater
before cleaning.
• Use only a clean, dry cloth to clean
the external surface of the heater only.
• Do not attempt to remove the front
grill of the heater.
• Use a vacuum cleaner regularly to
remove dust and fluff from the
element and grill.
• If the unit has accumulated dust
ar
ound the elements and grill that
cannot be removed with the use of a
vacuum cleaner, have a qualified service
agent clean the unit. DO NOT operate
the heater in this condition.
• Do not attempt to open the case of
the heater at anytime, there are no
customer serviceable parts inside.
• When not in use, pack the heater in
its original box for best protection and
store in a cool, clean and dry location.
• Return the unit to Kambrook or a
Authorised repair agent of Kambrook
for repair or service.
3