Filter
Top Products
• Use this heater only as described in
this instruction manual.Any other use
not recommended by the manufacturer
may cause fire, electric shock or injury
and voids all warranties.
INSTALLATION AND
OPERATING
1. Remove your heater from its carton,
unwind the cord to its full length.
Remove all protective packaging
2.Your heater must be wall mounted and
no closer that 25cm to ceiling, 200cm
to floor, 25cm to side walls.
3. Remove the mounting bracket from the
rear of the heater and secure to the
wall, with the five screws supplied.
NOTE: Fixed wire installations should be performed
by a qualified electrician.
4. Hook heater base onto mounting
bracket on wall.
5. Connect power (230/240V a.c.) by
plugging into an earthed power point
and switch on.
6.To switch heater on pull cord, until it
clicks and the neon light illuminates
7.To switch heater off pull cord again,
until it clicks and the neon light goes
out.
CARE AND MAINTENANCE
• Always turn heater off and switch off at
power outlet then unplug the heater
before cleaning
• Use only a clean, dry cloth to clean the
external surfaces of the heater only.
• Do not attempt to remove the front
grill of the heater.
• Use a vacuum cleaner regularly to
remove dust and fluff from the element
and grill.
• If the unit has accumulated dust around
the elements and grill that cannot be
removed with the use of a vacuum
cleaner, have a qualified service agent
clean the unit.
• DO NOT operate the heater in this
condition.
• Do not attempt to open the case of
the heater at anytime, there are no
customer serviceable parts inside.
• When not in use, pack the heater in its
original box for best protection and
store in a cool, clean and dry location.
3