6 7
Your Kambrook Upright Fan Heater Quick Start Guide
Hints/Tips to Retain Heat in
Your Home
• Don’t overheat your home.
The temperature of a heated
room in winter should be 18-21°C
• Your heater will work more
efficiently if you stick to Kambrook’s
recommended clearance spaces
• Choose the right size heater for the
room type you want to heat
• Zone off unoccupied rooms by
closing doors and only heat the
main living areas
• Fit window coverings like curtains
to halve winter heat loss
• Put draft stoppers, such as a rolled
up towel, at the bottom of outside
doorways to keep out cold air
• Keep the heat in and the cold out by
installing wall and ceiling insulation
• Avoid placing items too close to the
heater (both at the front and back)
for optimal air flow
1. 2400 watt heating element
2. ThermoGuard protection for
peace of mind
Control Panel
3. 2 heat settings, plus fan
only setting
4. Variable thermostat dial,
to maintain your desired
temperature setting
Turning the
heater on
Setting the
heating
mode and
variable
temperature
Turning the
heater off
Plug the cord
into a 230V or
240V power
point and
switch on.
Ensure the
heater is set
to the OFF
position and
the Variable
Thermostat
dial is turned
clockwise as far
as it will go to
MAX.
Turn the Mode
dial to the
highest setting 2.
Once a
comfortable
room
temperature has
been reached,
slowly turn
the Variable
Thermostat dial
anti-clockwise
until a click
sound is heard.
Turn the heater
off by turning
the Mode dial to
the OFF position.
Not Shown
• Convenient cord storage in base
• Safety tip-over cut-out switch