Filter
Top Products
For KFH29 and KFH31:The temperature
knob acts as an automatic thermostat:
• Turn both selector and temperature
knobs to high
• Once a comfortable room temperature
has been reached, slowly turn
temperature knob anti-clockwise until
you hear a click.
• At this setting your heater will
automatically cycle high and low to
maintain the desired room temperature
• For KFH29 only: Set the Oscillating
switch to ON, the heater will oscillate
40
0
to each side.
Note:There is a tip over switch on the
base of the heater.When the heater tips
over, it will turn off automatically.
Overheating Safety device
Your heater is fitted with a safety device
that switches off the heater in the event
of overheating. Should the heater stop
working, turn the heater off and inspect
for blockage of air inlet or outlet.Wait at
least 5 minutes for the protection system
to reset before attempting to restart the
heater.
If the heater fails to operate or the safety
device switches the heater off again,
return the heater to your nearest service
centre for examination or repair.
CARE AND MAINTENANCE
• Always turn off and then unplug the
heater before cleaning.
• Use only a clean, dry cloth to clean the
external surfaces of the heater only.
• If the heater has collected dust or dirt
inside the unit or around the element,
have the unit cleaned by a qualified
service agent. Do not operate the heater
in this condition.
• Do not attempt to open the case of the
heater at anytime, there are no
customer serviceable parts inside.
• When not in use, pack the heater,
preferably in its original box for best
protection, and store in a cool, clean
and dry location.
• Under normal operation in a dark
environment it may be possible to
see the heating element turn a dull
red during operation. This is a
normal operation.
5