Filter
Top Products
7
Using Your Kambrook Arctic 30cm Box Fan
Before First Use
Remove any promotional material
from the fan.
To Operate the Arctic
Box Fan
Plug the cord into a 230V or 240V
power point and switch on.
Turn the Timer dial to the ON
(continuous) position.
NOTE: To avoid an electrical circuit
overload, it is recommended that
no other appliances are plugged
into the same circuit as your fan,
when it is in use.
Use the Fan Speed dial to select the
desired air flow speed setting.
0 – The fan is in the ‘OFF’ position
1 – Low
2 – Medium
3 – High
NOTE: For the fan to work,
the Timer switch also has to
be activated, either in ‘ON’
(continuous mode) or in count
down timer mode.
Fig. 1
Setting the Rotating
Air Delivery
The Rotating Air Delivery function
works in all air flow settings.
Switch the Swing On/Off switch to
the ‘ON’ position. The fan is now in
Rotating Air Delivery mode.
Switch the Swing On/Off switch to the
‘OFF” position. The fan is no longer in
Rotating Air Delivery mode.
Setting the Timer
The Arctic Box Fan incorporates a
three hour timer, and will turn the
fan off after the selected pre-set
time has elapsed.
Turn the Timer dial clockwise to the
desired position to engage the timer
function (up to 180 minutes).
Care and Maintenance
Always switch the Arctic Box Fan off,
prior to cleaning the fan.
To clean the fan, wipe the exterior
with a soft, damp cloth. Never use an
abrasive cleaner.
When not in use, store the fan
(preferably in its original box) in a
cool, clean and dry location.