Kambrook KFA423 Fan User Manual


 
4
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook
Arctic HV Pedestal Fan
• Carefully read all instructions before operating
the Kambrook Pedestal Fan for the first time
and save for future reference.
• Remove and safely discard any packaging
material and promotional labels before
using the fan for the first time.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug
of this fan.
• Ensure that the surface is level, clean
and free of water and other substances.
• Always ensure the fan is properly assembled
before use. Follow the instructions provided
in this book.
• Keep the fan clean. Follow the cleaning
instructions provided in this book.
• Do not leave the fan unattended when in use.
• Do not place anything, on top of the fan when
assembled, when in use and when stored.
• This fan is not intended for commercial
or industrial use.
• Avoid touching mobile parts of the fan.
• Never insert fingers, pencils or any other
objects through the guards whenever the
power plug is connected, in particular
while the fan is switched on.
• Do not operate in the presence of explosives
and/or flammable fumes or liquids.
• Do not unplug the fan by pulling on the cord.
• Never carry the fan by the cord or yank
to disconnect from an outlet; instead grasp
the cord at the plug and pull to disconnect.
Do not pull the cord around sharp edges
or corners.
• The fan must not be used if the grilles are
not fastened correctly and the pedestal
stand and base correctly fitted as per
the instructions provided in this book.
• When unpacking the fan, check to see
you have received all the items listed in the
parts list before discarding the packaging.
• To avoid electrical circuit overload, it is
recommended that no other appliances
are plugged into the same circuit as your
fan when it is in use.
• Disconnect the power plug before dismantling,
assem
bling or before cleaning and when the
fan is not in use.