10
Ensure that the heater is switched off
and disconnected from the power
point before cleaning.
Use a clean, dry cloth to clean the
external surfaces of the heater. If
the heater has collected dust or dirt
inside the unit or around the elements,
have the unit cleaned by a qualified
service agent. Do not operate the
heater in this condition.
Do not attempt to open the case of
the heater at any time as there are no
customer serviceable parts inside.
When not in use, store the heater
(preferably in its original box) in a cool,
clean and dry location.
The air filter at the rear of the heater
can be easily cleaned by removing
the filter casing panel and removing
the mesh filter. A basic clean in
warm water to remove any build
up is adequate and allow time to
completely dry before replacing the
filter and the filter casing panel.
Care and Cleaning
KCE640_IB_FA.indd 10 16/10/09 10:50 AM