Filter
Top Products
7
The heater will
start operating
at the LOW heat
setting.
Quick Start Guide
Hints/Tips to Retain Heat in
Your Home
• Don’t overheat your home. The
temperature of a heated room in winter
should be 18-21°C
• Your heater will work more efficiently if
you stick to Kambrook’s recommended
clearance spaces
• Choose the right size heater for the room
type you want to heat
• Zone off unoccupied rooms by closing
doors and only heat the main living areas
• Fit window coverings like curtains to halve
winter heat loss
• Put draft stoppers, such as a rolled up towel,
at the bottom of outside doorways to keep
out cold air
• Keep the heat in and the cold out by
installing wall and ceiling insulation.
• Avoid placing items too close to the heater
(both at the front and back) for optimal
air flow
Turning the
heater on
Setting the
variable
temperature
Setting the
heating
mode
Setting the
oscillation
Turning the
heater off
Press the
MODE button
to select AUTO
setting.
Plug the cord
into a 230V or
240V power
point and
switch on.
Press the
VARIABLE
TEMPERATURE
button to
increase the
temperature
or press the
VARIABLE
TEMPERATURE
button to
decrease the
temperature.
Switch on the
unit using the
ON/OFF switch.
Press the
POWER/SWING
button to
activate the
oscillation. Press
again to stop
the oscillation.
Press the
POWER/SWING
button to
activate
Press and hold
the POWER/
SWING button
to place the
heater in
standby mode.
Press the ON/
OFF switch to
turn the heater
off.
Press the MODE
button to
select the HIGH
heat setting,
and retain a
comfortable
temperature for
your room.
KCE520_IB_FA.indd 7 12/10/09 12:10 PM