Filter
Top Products
7
MOTOR PROTECTION FILTER
The motor protection filter must always be in place
when operating the vacuum otherwise damage to
the motor may occur.
To replace the motor protection filter - remove the
dust container. The motor protection filter is located
at the bottom of the inner chamber. Pull the filter
upward to remove then simply replace with the
new filter.
ExHAUST FILTER
The exhaust filter should be cleaned every six
months. Simply unclip the grill at the back of the
vacuum cleaner and shake and tap the filter to
remove any dust accumulated. Then relocate the
filter and reattach the grill.
CARE AND MAINTENANCE
Always switch the vacuum off, then switch off at
the power outlet and unplug the appliance prior to
cleaning or replacing either filter.
To clean the outside of the unit, wipe the exterior
with a soft, damp cloth. Never use an abrasive
cleaner.
IMPORTANT: CHECK AND REPLACE bOTH THE MOTOR
PROTECTION AND HEPA FILTERS APPROXIMATELY TWICE A
YEAR OR WHEN VISIbLY CLOGGED.
KBV580_IB_V3.indd 7 10/6/09 3:21:48 PM