Filter
Top Products
6 7
MOTOR PROTECTION FILTER
The motor protection filter must always
be in place when operating the vacuum
otherwise damage to the motor may
occur.
To replace the motor protection filter
- remove the dust container. The motor
protection filter is located at the bottom
of the inner chamber. Pull the filter
upward to remove then simply replace the
new filter.
EXHAUST FILTER
The exhaust filter should be cleaned every
six months. Simply unclip the grill at the
back of the vacuum cleaner and shake
and tap the filter to remove any dust
accumulated. Then relocate the filter and
reattach the grill.
CARE AND MAINTENANCE
Always switch appliance off, then switch
off at the power outlet and unplug the
appliance prior to cleaning or replacing
either filter.
To clean the outside of the unit, wipe the
exterior with a soft, damp cloth. Never
use an abrasive cleaner.
CHECK AND REPLACE BOTH
THE MOTOR PROTECTION
AND HEPA FILTERS
APPROXIMATELY TWICE
A YEAR OR WHEN VISIBLY
CLOGGED.
Notes
Notes
KBV50.indd 6-7 9/5/07 11:42:25 AM