Filter
Top Products
5
USK SFC 1 - 080403
performance. Regular descaling might be needed to maintain an
optimal performance.
When used correctly the Steamer can kill dust mites and some types
of bacteria, such as salmonella and E-coli.
To disinfect a specific area, position the steamer over the area for a
minimum of eight seconds. The steam temperature will reach to
approximately 100°C (212 °F). Use this procedure to disinfect floors
near: bathroom stools, kitchen counters, pet sleeping quarters, etc.
INSTRUCTIONS FOR USE
The Steamer is designed to thoroughly clean floor surfaces, such as
marble, ceramic, stone, linoleum, sealed hard wood floors and
parquet.
WARNING: ON SURFACES THAT HAVE BEEN TREATED WITH WAX,
THE WAX MAY BE REMOVED BY THE HEAT AND STEAM
ACTION. DO NOT USE ON UNSEALED WOOD FLOORS OR
LET UNIT STAND ON ANY WOOD FLOOR FOR AN EXTENDED
PERIOD OF TIME. THIS COULD CAUSE THE WOOD GRAIN TO
RISE. IT IS THEREFORE RECOMMENDED THAT A SAMPLE
CLEANSING BE CARRIED OUT ON AN ISOLATED AREA OF
THE FLOOR. IT IS ALSO RECOMMENDED THAT YOU CHECK
THE USE AND CARE INSTRUCTIONS OF THE SURFACE FROM
THE FLOOR MANUFACTURER TO ENSURE SUITABILITY TO
STEAM CLEANING.
HOW TO ASSEMBLE AND USE
1) Insert steamer head onto the steamer body
2) Secure the steamer head with the small Philips-head screws until
fully tightened (only before first use)