JVC TK-AM200U Home Security System User Manual


 
R
JVC PROFESSIONAL PRODUCTS COMPANY
DIVISION OF JVC AMERICAS CORP.
1700 Valley Road, Wayne, N.J. 07470
TEL: (973) 315-5000, (800) 582-5825
FAX: (973) 315-5030
E-mail: proinfo@jvc.com
JVC CANADA INC.
21 Finchdene Square, Scarborough, Ontario M1X 1A7
TEL: (416) 293-1311 FAX: (416) 293-8208
Internet Web Site http://www.jvcpro.com/
DISTRIBUTED BY
Design and specifications subject to change without notice.
Printed in Japan
KCN-1777
CETKAM200UKN2000.4
This catalog is printed on recycled paper.
Specifications
CAMERA
Signal system NTSC
Image device 1/4" IT CCD
Effective picture element NTSC: 380,000 pixels, 768 (H) x 494 (V)
Sync system Line lock/Internal
Video S/N 50 dB (typical)
Horizontal resolution 470 TV lines (typical)
Minimum illumination 4 lux (Full wide angle, AGC 20 dB,
Y: 25% with cover)
Camera ID 16 characters
White balance ATW/MANUAL/AWC
BLC Available by adjustment of light
metering area position
LENS
Focal length f = 2.2 mm
Max. aperture ratio F1.0
MOVING MECHANISM
Panning ±30° from original axis
Panning speed 2°/s, 4°/s, 6°/s, 12°/s, 20°/s, 40°/s,
60°/s, 80°/s (in manual mode)
4°/s (AUTO PAN mode)
120°/s (Preset maximum)
Tilting 0° to 60° (from down to horizontal
direction)
Tilting speed 2°/s, 4°/s, 6°/s, 12°/s, 20°/s, 40°/s,
60°/s, 80°/s (in manual mode)
120°/s (Preset maximum)
GENERAL
Remote control input RS-232C, RS-422A or RS-485
Power requirement AC 24 V, 50/60 Hz
Power consumption 570 mA
Operating temperature range 14°F to 122°F /-10°C to +50°C
(recommendation: 32°F to 104°F/
0°C to +40°C)
Dimensions Approx. ø4-3/8 x 5-3/8 inches
Weight
Approx. 1.8 lbs/0.8 kg with ceiling mount
Controls, connectors and indicators
Dimensions
Unit: inches (mm)
Basic system
5-3/8 (135)
1-1/16 (26)
1/16 (1)
φ4-3/8 (φ110)
φ3 (φ75)
Terminal
q Control signal selector switch
w System setting switches
e FOR SERVICE connector
r Camera ID setting switches
t Camera body mounting guides
y AC 24V input terminals
u Control signal connection
terminals
i Panic Alarm signal input
terminal
o Camera body clamp
!0 Drop prevention wire hook
!1 Video input terminal
!2 Terminal board
!3 Mounting holes (x4)
!4 Camera body mounting guides
(x3)
!5 Camera positioning alignment
mark
!6 Camera direction alignment
mark
!7 Drop prevention wire hook
VCR
MONITOR
RM-P2580E
CONTROLLER
CAM8
MACHINE ID
TERM
: 08
: OFF
CAM2
MACHINE ID
TERM
: 02
: OFF
CAM1
MACHINE ID
TERM
: 01
: ON
The Hachioji Plant of Victor Company of Japan, Ltd., has received ISO14001 Certification
under the global standard for environmental management.