JVC KD-S45 Fan User Manual


 
12
ENGLISH
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table on pages 13 and 14.
1
2 Select a PSM item.
3 Adjust the PSM item selected.
4 Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5 Finish the procedure.
Indication, [Range]
BASS *
1
, [–06 to +06]
Adjust the bass.
MIDDLE *
1
(mid-range), [–06 to +06]
Adjust the mid-range frequencies sound level.
TREBLE *
1
, [–06 to +06]
Adjust the treble.
FADER *
2
, [R06 to F06]
Adjust the front and rear speaker balance.
BALANCE *
3
, [L06 to R06]
Adjust the left and right speaker balance.
LOUD *
4
(loudness), [LOUD ON or LOUD OFF]
Boost low and high frequencies to produce a
well-balanced sound at a low volume level.
SUB.W *
5
, [00 to 08, initial: 04]
Adjust the subwoofer output level.
VOL ADJ (volume adjust), [–05 to +05, initial: 00]
Adjust the volume level of each source (except FM), in
relation to the FM volume level. The volume level will
automatically increase or decrease when you change
the source.
Before making an adjustment, select the source you
want to adjust.
VOLUME, [00 to 50 or 00 to 30] *
6
Adjust the volume.
*
1
When you adjust the bass, mid-range, or treble, the
adjustment you have made is stored for the currently
selected sound mode (iEQ) including “USER.”
*
2
If you are using a two-speaker system, set the fader
level to “00.”
*
3
This adjustment will not affect the subwoofer output.
*
4
The adjustment made (LOUD ON/LOUD OFF) will be
applied to all sound modes.
*
5
Displayed only when “L/O MODE” is set to “SUB.W”
(see page 13).
*
6
Depending on the amplifier gain control setting. (See
page 14 for details.)
EN08-15_KD-G440[J]_3.indd 12EN08-15_KD-G440[J]_3.indd 12 10/24/07 12:17:29 PM10/24/07 12:17:29 PM