JVC KA-ZH215U Electric Heater User Manual


  Open as PDF
of 2
 
Thank you for purchasing the JVC option hater unit.
To obtain the best results from your new camera, read these instructions carefully before use;
retain the manual for future reference.
These instructions are for KA-ZH215U
These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appli-
ances.
To save energy, turn the power off when not in use.
This unit is a special heater for TK-C215VP4U, TK-C215VP4E, TK-C215VP12U,TK-
C215VP12E (henceforth referred to TK-C215VP series) Dome camera. It cannot be installed
to other color video cameras.
Use AC 24 V power supply for TK-C215VP series.
Do not modify this machine without prior permission. Accidents may occur.
Refer to the instructions for TK-C215VP series on installing the camera and connecting the
cables.
After installing to TK-C215VP series , switch off the machine power supply and then connect.
Always use the desiccant that comes with this unit. Other desiccants or the desiccant that
comes with TK-C215VP series are unable to remove moisture completely under extreme low
temperature.
When the heater board is installed, the switch on the camera unit is hidden and image adjust-
ment cannot be made. Always adjust the image quality before installing the heater.
Do not use the heater unit in the following locations:
• Locations where the surrounding temperature exceeds -22J to 122J (-30f to 50f).
• Locations where corrosive gas occurs.
• Vibrating locations
Do not touch this unit during operation or after operation as its temperature is high.
It may cause a burn.
Mount this unit onto TK-C215VP series.
Step1: Disassembling TK-C215VP series
Switch off the power supply of the camera.
1. Removing the dome cover
Remove the dome cover by unfastening the 3
fastening screws using the wrench supplied.
2. Removing the inner dome
The inner dome is fastened using lugs at 3 dif-
ferent positions. Grasp the inner dome and
remove it from the lugs.
HEATER UNIT
KA-ZH215U
For Customer Use:
Enter below the Serial No. which is located on the
body.
Retain this information for future reference.
Model No.
Serial No.
1. Read all of theseinstructions.
2. Save theseinstructions for later use.
3. All warnings on the product and in the operating instructionsshould be adhered to.
4. Unplug thisappliance system from the wall outlet before cleaning. Do not useliquid cleaners or
aerosol cleaners.Use a damp cloth for cleaning.
5.
Do not use attachments not recommended by the appliance manufacturer as they maycausehazards.
6. Do not use thisappliance nearwater - for example, near abathtub,washbowl, kitchen sink, or
laundry tub,ina wet basement, or near aswimming pool, etc.
7.
Do not place thisappliance on an unstable cart, stand, or table. The appliance may
fall, causing serious injury to a child or adult, and serious damage to the appliance.
Use only with a cart or stand recommended by the manufacturer, or sold with the
appliance. Wall or shelf mounting should follow the manufacturer's instructions,
and should use a mounting kit approved by the manufacturer. An appliance and
cart combination should be moved with care.
Quick
stops, excessive force, and uneven surfaces maycause the appliance and
cart combination to overturn.
8. Slotsand openings in the cabinet and the back or bottom are pro-vided for
ventilation, and to insure reliable operation of the appliance and to protect it from
overheating, these openings must not be blocked or covered. The openings
should never be blocked byplacing the appliance on abed,
sofa,rug, or other similar surface.
Thisappliance should never beplaced near or over a radiator or heat register. Thisappliance should
not beplaced in abuilt-in installation such asabookcase unless proper ventilation is provided.
9.
Thisappliance should be operated only from the type of power source indicated on the marking label.
If youare not sure of the type of power supplied to your home, consult yourdealer or local power
company. For appliance designed to operate from battery power, refer to the operating instructions.
10.For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it form the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning and power-line surges.
11.Do not allow anything to rest on the power cord. Do not locate thisappliance where the cord will be
abused by persons walking on it.
12.Follow a ll wa rningsand ins
tructions marked on the appliance.
13.Do not overloadwall outletsand extension cordsasthis canresult in fire or electric shock.
14.Never pushobjects of any kind into thisappliance through cabinet slotsasthey maytouch
dangerous voltage points or short outparts thatcould result in a fire or electric shock. Never spill
liquid of any kind on the appliance.
15.Do not attempt to
service thisappliance yourself as opening or removing covers may exposeyou to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
16.Unplug thisappliance from the wall outlet and refer servicing to qualified service personnel under
the following conditions:
a. When the power cord or plugis damaged or frayed.
b.Ifliquid has been spilled into the appliance.
c. If the appliance has been exposed to rain or water.
d. If the appliance does not opera te normally by following the operating instructions. Adjust only those controls
that are covered by the operating instructionsasimproper adjustment of other controls mayresult in damage
and will often require extensive work by a qua
lified techniciantorestore the appliance to normal operation.
e. If the appliance has been dropped or the cabinet has been damaged.
f. When the appliance exhibitsadistinct change in performance - this indicatesaneed for service.
17.When replacement partsare required, be sure the service technicianhas used replacement parts
specified by the manufacturer thathave the same characteristicsasthe originalpart. Unauthorized
substitutions mayresult in fire, electric shock, or other hazards.
18.Upon completion of any service or repairs to thisappliance, ask the service technician to perform
routine safety checks
to determine that the appliance is in safe operating condition.
IMPORTANT SAFEGUARDS
PORTABLE CART WARNING
(symbol provided by RETAC)
S3125A
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
FOR USA AND CANADA
This Class B digital apparatus complies with
Canadian ICES-003.
Duetodesign modifications,data given in this
instruction book are subject to possible change
without prior notice.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.
AVERTISSEMENT:
POUR EVITER LES RISQUES
D'INCENDIE OU D'ELECTROCUTION,
NE PAS EXPOSER L'APPAREIL A
L'HUMIDITE OU A LA PLUIE.
INFORMATION (FOR CANADA)
RENSEIGNEMENT (POUR CANADA)
The lightning flashwish arrowhead
symbol, within anequilateral triangle
isintended to alert the user to the presence
of uninsulated "dangerous voltage" within
the product's enclosure thatmay beof
sufficient magnitude to constitute a riskof
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
theus
er to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
Cet appareil numeriquedela ClasseBest
conforme a la norme NMB-003 du Canada.
TO REDUCE THE RISK OF ELECTRIC
SHOCK. DONOT REMOVECOVER (OR
BACK).NO USER-SERVICEABLE PARTS
INSIDE.REFER SERVICINGTO
QUALIFIED SERVICE PERSONNEL.
CAUTION :
INFORMATION FOR USA
INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-
nected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION
CHANGES OR MODIFICATIONS NOT APPROVED BY JVC COULD VOID USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
PRECAUTION
Contents
Installation Method
Memo
The dome cover and base are connected
with fall prevention wire.
Note
Before touching the camera unit, make
sure to touch the metal surface of the
[MONITOR] terminal to discharge any
static electricity from your body. Static
electricity may cause the camera to mal-
function.
Dear Customer,
This apparatus is in conformance with the valid European directives and standards regarding
electromagnetic compatibility and electrical safety.
European representative of Victor Company of Japan Limited.is:
JVC Technology Centre Europe GmbH
P.O.Box 10 05 52
61145 Friedberg
Germany
Instructions
1
Warranty Card
1
Service Information Card
1
Desiccant
(Service Parts
No.LW40790-001A)
1
HEATER UNIT
1
Wrench
(Supplied)
Fall Prevention
Wire
Inner
Dome
Lug(x 3)
TK-C215VP4 is used in the illustration.
LST0472-001A