Filter
Top Products
EN 55
REC SP
30MIN
444
4
S.LX T30
01
MWB
NORM
5MIN
1 4S
LENS COVER
PAUSE
DEC 25. 98 AM 11 :45 : 18
MERRY CHRISTMAS
TAPE END
TWILIGHT
1* 6 * 7
2
3 4 5
^*
&
*
9
%
0
#
$
)
(
q
8
!
@
INDEX
LCD monitor/Viewfinder Indications
$ Instant Title Display ............................ ੬ pg. 28
% Date/Time Display ..............................੬ pg. 22
^*Battery Pack Remaining Power Indicator
Changes as follows according to the battery
pack’s remaining power level:
“
”. When the power is
almost gone, the indicator “
” blinks (battery
power warning
†
), then the unit shuts off. Replace
the battery pack with a fully charged one.
Note: The symbol containing 3 darkened squares
—
— does not necessarily mean that the
battery pack is fully charged.
& Focus Indicator................................... ੬ pg. 33
* Exposure Control Level Counter .........੬ pg. 34
( White Balance Mode Indicator ...........੬ pg. 35
) Clock Battery Warning
Blinks for approx. 10 seconds when the power is
turned on. This display also blinks when the
clock (lithium) battery is either not installed or
has discharged. Install or replace the old battery
with a new one (
੬ pg. 10).
q •Tape End Display: TAPE END ...........੬ pg. 17
Appears when the end of the tape is reached
during playback, recording or fast-forward.
•Condensation Warning:
When this indication appears, all functions
except tape eject and power on/off are disabled.
Turn the unit off (without removing the power
source) for a few hours, and when you turn it on
again the indication should disappear.
1*Cassette Warning/
Tape Remaining Time .........................
੬ pg. 17
When no cassette is inserted: the cassette (
)
warning blinks.
When Erase Protection tab is not in the position
that allows recording: the cassette (
) warning
lights. Otherwise, the tape remaining time is
displayed and the tape remaining time warning
†
blinks when the tape is about to reach its end.
When the Power Switch is set to “PLAY” and a
tape is loaded: the cassette (
) mark is displayed
regardless of the Erase Protection tab’s position.
2 Recording Mode (SP/EP) Indicator.......੬ pg. 12
3,9 Program AE Indicator .....................੬ pg. 24
Displayed at 3 for approx. 1 second when the
Select Dial is switched from one position to
another. Then only the indicator remains at
9.
3,0 Fade/Wipe-Standby Indicator......... ੬ pg. 26
Displayed at 3 for approx. 2 seconds when the
Fade/Wipe is switched from one function to
another by pressing the EFFECT button. Then
only the indicator remains at
0.
4 Multi-Function Control
Indication ...................................
੬ pg. 26 – 28
Displayed when any of the buttons located on
the Multi-Function Control is pressed. The
indication disappears within approx. 2 seconds.
5 Super LoLux Indicator.........................੬ pg. 27
6*Tape Length Indicator .........................੬ pg. 12
7 Zoom Indicator Bar.............................੬ pg. 20
8 Recording Indicator ............................੬ pg. 16
! Picture Stabilizer Indicator.................. ੬ pg. 21
@ Interval Timer/Recording Time Indicator... ੬ pg. 36
# •Record–Standby Mode Indicator ......੬ pg. 16
•Lens Cover Warning:
LENS COVER ...................................
੬ pg. 17
*: Displayed for approx. 5 seconds on the LCD monitor
when the LCD monitor is turned on, and then
disappear. However, the indications marked † are
not displayed.