14
Jøtul C 450 Kennebec
Non-Catalytic
Clean Burn
Cast Iron & Steel
27 1/2” x 23” x 14”-17”
450 lbs.
6”
40” x 18”
up to 20”
(21”=firebox width)
55,000 BTU/hr
up to 1,600 sq. ft.
71%
4.4 grams/hr
up to 8 hours
Jøtul C 550 Rockland
Non-Catalytic
Clean Burn
Cast Iron & Steel
33” x 23 3/4” x 19
550 lbs.
6”
37” x 16”/20”Can
up to 24”
65,000 BTU/hr
up to 1,800 sq.ft.
71%
4.0 grams/hr
up to 10 hours
Model
Combustion
Technology
Construction
Minimum Fireplace Dimensions
Weight
Flue Size
Minimum Hearth Dimensions
Log Length
Maximum Heat Output
1
Heating Capacity
2
Overall Efficiency
3
Emissions
Burn Time
Jøtul C 350 Winterport
Non-Catalytic
Clean Burn
Cast Iron & Steel
32” x 19 1/2” x 16”
272 lbs.
6”
34 1/2” x 16”
up to 20”
40,000 BTU/hr
up to 1,300 sq. ft.
71%
4.0 grams/hr
up to 7 hours
All dimensions measured from the fireplace cavity
centerline or the hearth surface
Minimum Dimensions Jøtul C 350 Jøtul C 450 Jøtul C 550
A: Hearth Width from
centerline 17 1/4” 20” 18 1/2”
B: Hearth Depth 16” 18” 16”/20” CAN***
C: To 1” Side Trim from
centerline 19 1/2” 20 3/4” 21 3/4”
D: To Side Wall from
centerline 54 1/2” 44 1/4” 54”
E: To 1” Top Trim 39”* n/a n/a
F: To 3 1/2” Mantel 48”* 49 1/2” 51 3/4”/57 3/4” CAN**
To 11 1/2 Mantel 54”* 55 1/2” 57 3/4”/63 1/2” CAN**
G: Front Opening Width 32” 27 1/2 33”
H: Lintel Height 19 1/2”* 23” 23 3/4”
I: Rear Wall Height 16 3/4” 21 1/2” 22”
J: Rear Wall Width 22 3/4” 25 1/2” 24”
K: Fireplace Depth 16” 14”-17” 19”
* Add 2” w/ Jøtul C
350 Riser
** Mantel clearance may be reduced by 15 1/2” in both US and
Canada with use of optional Mantel Heat Shield
*** 18” in Canada with 2 1/2” raised hearth extension in code approved
masonry fireplace
1
Maximum Heat Output is based on kg of dry wood burned per hour
2
Heat Capacity and Maximum Burn Time will vary depending on design of home,
climate, wood type and operation
3
Overall Efficiency is based on a burn rate of .75kg wood per hour
* Depth is overall depth with ashlip and smoke outlet included
94572_New_WoodInserts.indd 14 9/6/07 12:53:01 PM