Filter
Top Products
UNDERGROUND FITTINGS
Speedfit underground fittings for metric size polyethylene
cold water service pipe have been designed for
connection of:
1. Blue MDPE pipes to BS 6572 - used for underground
service pipes for potable water.
2. Black MDPE pipes to BS6730 - used for conveyance
of potable water above ground or for industrial
services above or below ground.
3. Pipe to ISO 161/1, ISO 3607 and DIN 16893.
Making the connection could not be easier. All you need is
the pipe, the fitting and a pair of hands. The range is
designed to provide a long service life and includes adaptors
for screwed pipe, copper and imperial sized LDPE.
• Easy to use in confined spaces, no tools required.
• Fast installation with resulting cost savings.
• Lightweight and slimline.
• Ready for immediate installation, no dismantling.
• No adjustments required after fitting.
• Adaptors for screwed pipe, copper and imperial LDPE.
• Maintenance free.
• Durable with high resistance to impact.
• Patented collet ensures high resistance to pull out.
• Lead free and non toxic.
• Will not support biological growth.
• A reliable and trouble free leakproof connection.
Cut pipe square using pipe cutters, remove burrs and
sharp edges. Always use a pipe insert.
Pipe insert
The fitting is supplied ready
for installation and requires
no adjustment. Push the
pipe into the fitting.
Push pipes into fitting
Collet
ʻOʼ ring
Collet Cover
Push the pipe up to the
pipe stop. The collet has
teeth that grip the pipe
whilst the ‘O’ ring provides
a permanent leak proof
seal.
Ensure that the system is
depressurised. Release and
pull back collet cover.
Push in collet square against
the face of fitting.
With the collet held in this position, the pipe can be withdrawn.
We recommend the replacement of the ‘O’ ring and collet
before making a new connection.
Remove collet cover, pull
out metric size collet and
‘O’ ring. Keep with metric
pipe support liner for future use.
Carefully push imperial size
‘O’ ring and collet into
position, ensuring seal is
clean before insertion.
Replace the snap-fit collet
cover and, having inserted
the imperial pipe support,
connect the pipe as
shown above.
Using the Inch Change Kit shown on page 28.
PARTNO.SIZEMM
JG401B 20
JG402B 25
Cold water only
PARTNO.SIZEMM
JG501B 25 x 20
Cold water only
PARTNO.SIZE
JG101B 20mm x 1/2” BSP
JG102B 25mm x 3/4” BSP
Cold water only
PARTNO.SIZE
JG4501B 20mm x 1/2” BSP
JG4502B 25mm x 3/4” BSP
Cold water only
PRODUCT RANGE
PARTNO.SIZEMM
JG301B 20
JG302B 25
Cold water only
PARTNO.SIZEMM
JG801E 20
JG802E 25
Cold water only
PARTNO.PIPE STEM
OD OD
JG222025B 20mm 25mm
JG222525B 25mm 25mm
PARTNO.SIZEMM
JG601B 20 x 15
JG603B 25 x 15
JG602B 25 x 22
Cold water only
Suitable for Tables X & Y Copper
Used to connect PE Pipe to
copper or Speedfit Plumbing Pipe
PARTNO.SIZEMM
UTS147 - DB 20
UTS197 - DB 25
SPARE PARTS
PARTNO.SIZEMM
20 UPC 20
25 UPC 25
PARTNO.SIZEMM
20 UOR 20
25 UOR 25
PARTNO.SIZEMM
JG201B 20
JG202B 25
Cold water only
PARTNO.SIZEMM
JGK01E 1/2”
JGK02E 3/4”
Cold water only
To convert metric size fittings for
use with imperial size LDPE to
BS1972 Class C or Class D
APPLICATIONS
INSTALLATION BENEFITS
PERFORMANCE BENEFITS
MAKING A GOOD CONNECTION
TO DISCONNECT
CONNECTING TO IMPERIAL SIZE LDPE
EQUAL STRAIGHT CONNECTOR
REDUCING STRAIGHT CONNECTOR
MALE ADAPTOR
FEMALE ADAPTOR
PLUGS
EQUAL ELBOW
STEM ELBOW
EQUAL TEE
PE-COPPER COUPLER
PIPE INSERT
COLLETS
‘O’ RING
INCH CHANGE KIT
27
28