Filter
Top Products
14
Changing the dust bag
Replacing the dust bag
If the dust bag change indicator is completely yellow when
the floor tool is lifted from the floor and the highest suction
power is selected, the dust bag must be changed, even
though it may not yet be full. In this case it is essential to
change the dust bag due to the type of material it contains.
The nozzle, suction pipe and flexible tube must not be
blocked, as this would also lead to dust bag change indicator
being triggered.
The handle can easily be detached from the hose to remove
blockages.
Open the lid by moving the locking lever in the direction of
the arrow.
Seal the dust bag by pulling the sealing strip and then
remove it.
9000 578 818 A 14.07.2010 11:01 Uhr Seite 14