Jackson Heater Replacement Gas Heater User Manual


 
5. Using the 3/8” nutdriver, remove the nuts securing the heater
wires to the heater. Then carefully pull the wires out of the way.
6. Next, use the ratchet and 1/2” socket to remove the heater
mounting nuts.
7. Removing the heater may require that you reach into the wash
tank, grasp it and try give it a push out of the wash tank.
8. Once the heater is pushed away from the tank wall, pull it out
with your hands.
www.jacksonmsc.com
Heater Replacement Instructions
Revision A (09/23/2005)
3
Removing upper (wash) strainer.
Reaching into the wash tank.
Pulling the heater out.
Removing the heater gasket
Removing the heater nuts.
Using the ratchet to remove the heater mounting nuts.